


Product Name:Floating dredge hose
Brand name: Ocelot
ID Size: 100mm-2200mm
Process Service: Moulding
Materials: Rubber& Steel
OEM: Accepted
Working Temperature: -20℃-50℃
Working pressure: -14.5/43.5psi
Package: Standard exported package
Floating dredge hose introduce:
Ocelot dredge hoses are purpose-built to the special requirements of our clients.
We are in the position to build dredge hose sizes ranging from 100 mm ID to 2200 mm ID.
Our designers will select the most appropriate materials from a wide range of products available to us to meet service and demands requested by our clients requirements in regard to wear resistance, pressure ratings, tensile strength, bending capabilities and so on.
In general the Ocelot Dredge Hoses consist out of an inner lining adjusted to the specific requirement of transported media.
Wear indicator layers can be implemented in the dredge hoses which transport abrasive media.
A textile reinforcement of high tensile strength will control the pressure resistance of the dredge hose as well as the tensile strength.
Where as the outer cover is built up by a rubber compound highly resistant against weathering, UV lights and Ozone.
On special request the outer cover can be built with oil resistant materials.
Ocelot Dredge hose end fittings are available in a wide variety which are selected on duty requirements.
Discharge Dredge Hoses
Floating Dredge Hoses
Pre-Shaped Dredge Hoses
Armoured Dredge Hoses






Floating dredge hose Technical Parameters:
Standard Dimension | Working | Pressure | |||||||||
Metal pipe | Rubber hose | 5kg/cm | 7 | 8 | 10 | 12 | 15 | 20 | 25 | 30 | |
IN DIA.(mm) | IN DIA.(mm) | Total length | |||||||||
410 | 410 | 1200 | 8 | 12 | |||||||
460 | 460 | 1300 | 8 | 12 | 14 | ||||||
510 | 510 | 1400 | 9 | 13 | 14 | ||||||
560 | 560 | 1500 | 14 | 16 | 19 | ||||||
610 | 610 | 1500 | 17 | 22 | |||||||
650 | 659 | 1600 | 19 | 22 | 26 | ||||||
710 | 710 | 1700 | 20 | 24 | 28 | ||||||
760 | 760 | 1800 | 26 | 30 | 33 | 35 | 38 | 40 | |||
800 | 800 | 1800 | 28 | 32 | 35 | 37 | 40 | 42 | |||
900 | 900 | 2000 | 33 | 36 | 39 | 42 | 44 |
Lining
Synthetic oil resistant rubber with high strength breaker plies impregnated and coated with high grade synthetic rubber to achieve maximum adhesion of the lining to the hose carcass.
Reinforcement
Multiple lies of high tensile reinforcing materials, with outstanding resistance to fatigue, applied at precise angles to achieve maximum strength and flexibility with minimum elongation.
Fully embedded steel wire coils are incorporated to achieve kink, crush and local load resistance.
Cover
Synthetic rubber, resistant to abrasion, weathering, sea water and oil. The cover, which incorporates reinforcing breaker plies is black with a bright orange spiral stripe or coated in tough bright orange polyurethane.
Closed cell expanded foam giving a minimum reserve buoyancy of minimum 20% over the entire hose length.
For more information please fill in the contact form, click here.